Solenoid Engine Generator Set || Free Energy Not Possible. This generator setup consumes far more electricity than it produces. Free energy is not possible. Feel free to rate / comment / subscribe for future engine videos.
The generator is made up of twelve 6 volt cd rom motors wired together in parallel. The output voltage is boosted from 1.2 volts to 5 volts by the inline dc-dc boost module.
Engine Technical details:
Type: 60 degree V12 electric piston engine
Maximum RPM: 3,200 RPM
Input voltage: 24 volts dc
Speed controller: Mechanical PWM
Cylinder bore diameter: 8mm
Piston stroke length: 10mm
Total theoretical displacement: 6cc
Firing order: 1, 12, 5, 8, 3, 10, 6, 7, 2, 11, 4, 9 (Same as old type Ferrari)
Main bearing size: 4x9x4 mm (684zz)
Big end bearing size: 4x9x4 mm (684zz)
Flywheel mass: 900g
Switching transistors: 2N3055
Solenoid model: SOLEN 121E16530 (with built in flyback diode)
Total mass of engine: 6kg approximately
Exhaust emissions: zero
A solenoid engine uses the magnetic pull of solenoids to turn a crankshaft, and resembles the architecture of an internal combustion engine. The crankshaft on this engine is made up of one hundred and forty individual parts bolted together, and is fully counterweighted to balance the rotational mass. The flywheel is an old drill / lathe chuck of some sort (army surplus), the engine has a tachometer pulse generator on the rear of the timing / distributor shaft to run the red LED tachometer, it uses Meccano timing chain and sprockets, and has a key ignition switch for added style. This engine can run both as a four stroke or as a two stroke, and can switch while running. This engine does not develop much torque, certainly much less torque than a standard rotary electric motor can produce, for the equivalent power input – for this reason the solenoid engine is just a novelty and an educational model.
I built this engine for fun, from mainly scrap metal and wood, and using mostly hand tools, and a basic drill press, during autumn 2014. It is based on a single cylinder prototype I had previously made here: https://www.youtube.com/watch?v=xiFonBrKQk0
You can watch stages of the V12 engine build here: https://www.youtube.com/watch?v=k64LixRRfEw
The solenoids I used are available here: https://www.esr.co.uk/electronics/switches-solenoid.htm
Be sure to subscribe to my channel for future new engine videos: http://www.youtube.com/subscription_center?add_user=davidrobert2007
Check out some of the other engines I have built if you like -
My first solenoid engine #1: https://www.youtube.com/watch?v=GIbJPPuufwU
Single solenoid engine #2: https://www.youtube.com/watch?v=ijETfxeNJBk
Fast single solenoid engine #3: https://www.youtube.com/watch?v=4XCUK0fpBT4
Steam engine style solenoid engine: https://www.youtube.com/watch?v=UmN57xc7Mm4
V8 solenoid engine: https://www.youtube.com/watch?v=uhYEdD94vH0
Thanks for watching.
Tags: Solenoid Engine Generator Set || Free Energy Not Possible, v12 solenoid engine, v12 engine, v12, solenoid engine, free energy